OB1® BioBased Fix & Bond Adhesive
OB1® BioBased Fix & Bond Adhesive is a versatile adhesive containing biobased content with high initial tack and bond strength.
OB1® BioBased Fix & Bond Adhesive specifically developed for bonding wood, chipboard and hardboard to brickwork, stone and concrete, and is also suitable for bonding most building substrates, EPS and XPS ornaments and decorative trims.
CHARACTERISTICS
- 310ml Cartridge
- Partially BioBased
- Works on damp surfaces
- Almost odourless
- Solvent free
- Non corrosive towards metals
- Paintable with water-based and bio-based paints once fully cured.
APPLICATION
OB1® Fix & Bond Adhesive provides perfect adhesion without primer on most substrates but on very porous substrates like gypsum and aerated concrete a primer may be required. Always test adhesion prior to application.
- Surfaces must be clean and free from dust, grease and other loose material.
- Apply the adhesive in 6mm beads, 5cm from the edge and approximately 20-40cm apart.
- Immediately place item into position with good even pressure to give an excellent initial grab. On heavy items, temporary support may be necessary during the curing process.
STORAGE
Shelf life in original sealed packaging: 18 months stored in shaded conditions between 5°C to 25°C.
DIRECTIONS FOR USE
Not suitable for continuous exposure to water. Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates.
